Ogden Foundation Pros logoOgden Foundation ProsFoundation Repair · Ogden, UT
Menu
foundation repair in Ogden, UT

Ogden Foundation Pros

Foundation Repair in Ogden, UT

Foundation Repair in Ogden, UT covering piering, crack injection, and wall stabilization, with written scope and free estimates.

Serving Ogden and nearby communities.

Foundation repair covers the full range of fixes for a structure that's moving, cracking, or settling: pier installation, crack injection, wall anchoring, and the grading work that follows. It's one service umbrella, but the right fix depends on what's actually happening under the slab.

Ogden Foundation Pros builds each repair plan around the home itself. Rail-era houses near downtown often sit on benchland and fill soils that shift differently than a new-build subdivision, so an inspection comes before any pier count or crack treatment gets locked in.

What's included

What's included

  • Inspection and diagnosis — a technician walks the foundation inside and out, checking crack patterns, door and window function, and soil conditions.
  • Method selection — push piers, helical piers, or crack injection, chosen based on load and access, not a one-size answer.
  • Install and load transfer — brackets, piers, or sealant go in, and the structure gets leveled or stabilized as designed.
  • Grading and cleanup — disturbed soil gets backfilled and graded so water sheds away from the foundation going forward.

How it works

How our Foundation Repair process works

  1. Structural Evaluation photo
    Step 1

    Structural Evaluation

    Technicians check Ogden's older block and poured walls for crack direction and movement.

  2. Soil Analysis photo
    Step 2

    Soil Analysis

    Benchland fill near the Wasatch front gets tested to see how it's shifting.

  3. Support Design photo
    Step 3

    Support Design

    Pier count and spacing get set based on load and depth to stable soil.

  4. Excavation photo
    Step 4

    Excavation

    Small access points open along the footing where piers or brackets go in.

  5. Support Installation photo
    Step 5

    Support Installation

    Piers or brackets are set and the structure is leveled in stages.

  6. Backfill and Cleanup photo
    Step 6

    Backfill and Cleanup

    Excavated spots are filled and graded to match the yard.

Materials

Materials and methods for Foundation Repair

Ogden's clay-sand benchland soil and freeze-thaw winters call for materials rated to hold under seasonal movement, not generic patch products.

  • Steel Push Piers photo

    Steel Push Piers

    Driven past shifting fill soil to stable load-bearing ground, a common need under Ogden's older rail-era homes.

  • Helical Piers photo

    Helical Piers

    Screwed to depth for lighter additions and porches where access is tight.

  • Foundation Brackets photo

    Foundation Brackets

    Lock piers to the footing so the load transfers evenly instead of concentrating at one point.

  • Hydraulic Jacks photo

    Hydraulic Jacks

    Used to lift settled sections slowly, which matters on homes with original masonry that cracks if forced too fast.

  • Structural Shims photo

    Structural Shims

    Fine-tune the final elevation once the lift is close to level.

  • Waterproof Sealant photo

    Waterproof Sealant

    Applied over repaired areas, since full basements here take on more moisture exposure than slab-on-grade homes.

Timeline

How long does foundation repair take?

Most jobs run from a single visit to about a week, depending on whether it's a crack seal or a multi-pier lift.

  1. 01

    Consult and inspection

    same day
  2. 02

    Repair plan and scheduling

    1–3 days
  3. 03

    Pier or crack install

    1–3 days

    depending on pier count

  4. 04

    Backfill and grading

    half day
  5. 05

    Follow-up check

    30–60 days

    after settling

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and after Foundation Repair

  • foundation repair in Ogden, UT
    Before
  • foundation repair in Ogden, UT
    After

FAQs

Foundation Repair FAQs

How much does Foundation Repair cost in Ogden?

Crack injection runs a few hundred to around $1,500. Multi-pier underpinning for a settled wall typically runs $6,000–$15,000 or more, depending on pier count and access. A free estimate gets you an exact number.

How long does Foundation Repair take?

Crack injection is often same-day. Pier-based underpinning usually takes a few days on site, plus a short permit lead time for structural work.

Do I need a permit for Foundation Repair?

Structural pier work and underpinning usually do. Standalone crack injection with no structural movement usually doesn't. Weber County makes the final call.

Is DIY Foundation Repair a good idea?

Caulking a hairline cosmetic crack is fine to try. A diagonal crack, a bowing wall, or a dropped corner needs piering, not a tube of sealant.

What affects Foundation Repair pricing?

Pier count, depth to stable soil, crack severity, and access to the work area all move the number more than square footage does.

What is typically included in Foundation Repair?

Inspection, method selection, the install itself, and final grading. Anything beyond that, like a sump pump add-on, gets scoped separately.

How do I prepare my home for Foundation Repair?

Clear furniture or storage near interior crack sites and keep a path open to exterior pier locations. The crew handles the rest.

Next step

Get a Foundation Repair estimate in Ogden

Call Ogden Foundation Pros at (385) 492-6131 or request a free estimate online. Diagnosis comes first, the quote comes in writing.

Home · Contact · Piering And Underpinning

Ask about Foundation Repair

Tell us about the project and how to reach you.

Call (385) 492-6131